Investing in family pools has allowed people to enjoy a pleasant swim anytime they want. Equip your pool with a heating system and enjoy swimming during all seasons. If you are interested, learn more about common pool heating problems with a guide from 303 Heat, who provide the best heating and cooling in Westminster, CO.
Common Pool Heating System Problems
Take a deeper look into the issues that prevent your pool from heating and running properly. Know the signs of heater malfunctions so you can get heating repair in Thornton, CO done on time. Here are some indications of heater malfunctions:
The Heating System Won't Turn On
It is a common problem that most pool owners face. If your heater does not turn on or does not ignite, it can be due to a faulty switch. Check the switch, thermostat settings, and the supply valve for the gas and pilot. The valve and pilot position should be correct without any loose connections.
Cold Water Flowing From the Heating System
Dirty filters are the main reason for your pool not heating. Due to this, the water flow decreases, keeping the water cool even after the switch is on. Sometimes, the pump runs with zero reading in the pressure gauge.
Weird Noises from the Heating System
Debris may clog the flush system if your heater produces unwanted rattling, grinding, and banging sounds. A damaged pressure switch might also be the cause of such problems.
Restricted Water Fow
If you notice low water flow from the pipelines, a clogged water filter might be the reason. To ensure adequate water supply, check the valves too.
Faulty Thermostat Settings
If your thermostat is set to a similar temperature to the water, it will not heat the pool. As a rule, always set the temperature two degrees higher than the water, and check the settings when you notice a thermostat issue.
Things to Check When your Pool Heating System is not Working
Not all issues are severe and need professional assistance. Rather you can solve some of the issues on your own if you know the basics of the system. Therefore, the following tips can save your pool heater and bring it back on track to ensure your comfort.
Check the Power Supply
Sometimes, a loose plug or a tripped fuse can be why your heater shuts off. You can check the switches and plug in the source again. During the inspection, mark the loose connections that need the technician’s support.
Check the Water Flow in the Heat Pump
If the water inflow is insufficient and lacking, there will be no heat transfer and additional damage to the heater components. An inadequate water supply will lengthen the heating time, so check your filters and valves for possible blockage.
Check the Evaporator Coil
To get maximum heat and minimum energy bills, remove all the debris from your evaporator coil and the heating unit. It will create sufficient air inflow and outflow, increasing your electricity bill while slowing down the heating process.
Check Temperature Settings
If your pool heater is not set at a higher temperature than the surroundings, it might not provide sufficient heating. You can also set a solar cover on your heater to prevent heat from escaping.
Check Filters
Dirty and clogged filters decrease the water flow and ultimately block it. So, check your filters for buildup and clean the debris to get an uninterrupted hot water supply.
Get the most affordable HVAC repair in Westminster with 303 Heat. Visit our website and sign up today for the best heating, cooling, and financing deals. Call (720) 465-6699 or send us an email; we will ensure we serve you with expertise and superior artistry.
